<![CDATA[Issues with program "run" in UIflow 2.0]]>Hey all! New to the m5stack world.

Was able to upload UIflow 2.0 from the burner program. I'm having upload issues with Uiflow 2.0 web app though. Seems more of a UIflow 2.0 issue than a usb driver issue. Tried uploading sketches from arduino ide and all worked fine.

Had 1 success with a custom sketch upload, but now I'm unable to proceed with other uploads. Either shows a memory error, or no reaction at all after pressing "run" button. Using atom s3 and core s3. Same issue with both. Any help would be appreciated. Thanks!

]]>https://community.m5stack.com/topic/6066/issues-with-program-run-in-uiflow-2-0RSS for NodeSat, 07 Mar 2026 08:43:06 GMTWed, 07 Feb 2024 22:52:36 GMT60<![CDATA[Reply to Issues with program "run" in UIflow 2.0 on Thu, 08 Feb 2024 14:05:26 GMT]]>@thefearface Lol. So it turns out changing which usb connection the cable was placed in fixed the issue. Everything works now with Uiflow. Weird. Thanks for the replies!

]]>https://community.m5stack.com/post/23708https://community.m5stack.com/post/23708Thu, 08 Feb 2024 14:05:26 GMT<![CDATA[Reply to Issues with program "run" in UIflow 2.0 on Thu, 08 Feb 2024 13:34:51 GMT]]>use M5 burner to ERASE and return the firmware afterputting Atom/S3 into boot mode

]]>https://community.m5stack.com/post/23707https://community.m5stack.com/post/23707Thu, 08 Feb 2024 13:34:51 GMT<![CDATA[Reply to Issues with program "run" in UIflow 2.0 on Thu, 08 Feb 2024 13:06:22 GMT]]>What browser are you using. I have found that only Chrome works 100%. Of course, if the device is rebooting, you'll get errors.

]]>https://community.m5stack.com/post/23706https://community.m5stack.com/post/23706Thu, 08 Feb 2024 13:06:22 GMT