ATOM-DTU-NB-IoT - modem does not respond anymore

erazor

@felmue there is nothing. I also removed and replaced Q3 with Q5. My idea was, that maybe Atom-RX line became output and killed Q3 but that's not the case.

Removing the Q5 completely changed nothing.

I ordered another two modules to check the signals but I start to think the issue is in the modem.

Maybe I come to a point where I should ask the M5 team for help. This is kinda annoying, I really like the design of the DTU.

felmue

Hello @erazor

ok, I see. Yes, I think getting in touch with M5Stack support is probably best.

Thanks
Felix

erazor

@felmue thanks for your hints and your time!

Forairaaaaa

Hi, can you offer me that code when the modem stopped responding? To see if my DTU will meets the same issue

erazor

Update for anybody who's reading this.

My previous assumption that the reset-button kills the modem seems incorrect.

I've had another two devices and carefully did not use the reset-button at all but these modules also stopped working.

erazor

@forairaaaaa you can find my code here:
https://github.com/erazor83/nb_dtu_reset_issue/

Felix22

i can not use this code, Error:

In file included from N:.....\nb_dtu_reset_issue-main\src\main\main.ino:21:
c:\Users\fb\Documents\Arduino\libraries\TinyGSM\src/TinyGsmClient.h:118:2: error: #error "Please define GSM modem model"
#error "Please define GSM modem model"
^~~~~
exit status 1

Compilation error: exit status 1

felmue

Hello @Felix22

please do not use the nb_dtu_reset_issue code - it was meant to debug an issue and can change the baudrate of the SIM7020 modem.

Thanks
Felix

johseffer

@felmue you solve that? Happened with me today, i think after i send a "AT&F" to factory reset the configurations, so now my module stop reply to at commands

felmue

Hello @johseffer

yes. See here.

Thanks
Felix

fkarner

Hello,

I'm working as well with the above mentioned hardware (7020G modem). For a while the program worked fine. Unfortunately since some time the modem does not respond anymore.

The example MQTT code given here does not work (no errors). I think I'm using the needed libraries, so I would not expect errors coming from there. The here already mentioned way to solve the problem by changing the baudrate was not successfull - still silence.

The Serial Monitor Output indicates that the initialisation is not possible:
21:23:10.998 -> waiting....1067s
21:23:26.485 -> waiting....1082s
21:23:41.922 -> waiting....1098s
21:23:57.420 -> waiting....1113s
21:24:12.866 -> waiting....1129s
21:24:28.348 -> waiting....1144s
21:24:43.793 -> waiting....1159s
21:24:59.276 -> waiting....1175s

so the M5Atom is still stuck here:

 while (!modem.init()) {
        log("waiting...." + String((millis() - start) / 1000) + "s");
    };

I really don't know how to solve this problem. Since I'm not an expert in programming I would be thankful if someone could help me out with a code to send simple AT-Commands via the Serial Input.

Thanks in advance
flori

felmue

Hello @fkarner

hmm, since you already tried changing the modem baudrate I am at a loss what might have gone wrong.

Maybe my serial pass-through example can shed some light onto this issue?

Thanks
Felix

fkarner

@felmue said in ATOM-DTU-NB-IoT - modem does not respond anymore:

hmm, since you already tried changing the modem baudrate I am at a loss what might have gone wrong.

Hi Felix,

thank you very much for your answer and the code example. I can upload the code, without errors. The Atom stops here:

19:19:49.162 -> ets Jun 8 2016 00:22:57
19:19:49.162 ->
19:19:49.162 -> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
19:19:49.162 -> configsip: 188777542, SPIWP:0xee
19:19:49.162 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
19:19:49.162 -> mode:DIO, clock div:1
19:19:49.162 -> load:0x3fff0030,len:1344
19:19:49.162 -> load:0x40078000,len:13964
19:19:49.162 -> load:0x40080400,len:3600
19:19:49.162 -> entry 0x400805f0
19:19:51.594 -> Start SIM7020 passthrough test

Unfortunately I do not get answer thru the serial monitor... I've tried:
AT+CEER=?, AT+CGMI=?, AT+CFUN=1. No response... By the way the modem LED's show acitivity red is on, blue flashes with ~.5Hz....

After that I reinstalled Arduino IDE. Now there are only the M5Stack Boards and the Arduino Boards listed. As Libraries I installed only the M5Unified and the M5GFX. I'm clueless. What could I try next?

Update: I've tried another 7020G modem. That one answers....

*19:43:58.890 -> ets Jun 8 2016 00:22:57
19:43:58.890 ->
19:43:58.890 -> rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
19:43:58.922 -> configsip: 188777542, SPIWP:0xee
19:43:58.922 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
19:43:58.922 -> mode:DIO, clock div:1
19:43:58.922 -> load:0x3fff0030,len:1344
19:43:58.922 -> load:0x40078000,len:13964
19:43:58.922 -> load:0x40080400,len:3600
19:43:58.922 -> entry 0x400805f0
19:44:01.378 -> Start SIM7020 passthrough test
19:44:04.165 -> AT+CEER=?

19:44:04.197 -> +CEER: (0,1)
19:44:04.197 ->
19:44:04.197 -> OK
19:44:14.518 -> AT+CGMI=?*

Thanks, flori