M5CAM board in Arduino



  • I am new to the electronic world and I am trying to run a demo code on a M5CAM with the Arduino IDE i just dont know how to manage the board. I guess there is something i need to install but i am really not sure. Any idea how ?



    1. install esp32 board in the board manager(before install you need add board url to the perferences. detail you could refer this tutorial :https://docs.m5stack.com/#/en/arduino/arduino_development).

    2. use the esp32 official example for esp32 cam.
      github link:
      https://github.com/espressif/arduino-esp32/tree/master/libraries/ESP32/examples/Camera/CameraWebServer



  • Thank you very much it was really helpful !



  • @m5stack i just recently had a problem using the code you provided me, it appears that the sketch is too big. It says "Sketch uses 2053855 bytes (156%) of program storage space. Maximum is 1310720 bytes."
    Is this a problem with my computer ? it is 8 ram and 1tb memory, core i7 7th generation intel processor



  • @carol-villegas oh, i forget some detail. you need setup the partition scheme to "No OTA" Tool---> partition scheme-----No OTA



  • @m5stack

    With M5Cam is there a menu config example to make this work correctly. I have tried many configurations and it reboots on load .

    Any suggestions would be great, I have had it working with the firmware you supply but cannot get the menu config working.

    Thanks

    Rebooting...
    ets Jun  8 2016 00:22:57
    
    rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
    configsip: 0, SPIWP:0xee
    clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
    mode:DIO, clock div:1
    load:0x3fff0030,len:4
    load:0x3fff0034,len:7500
    load:0x40078000,len:15364
    load:0x40080400,len:4832
    entry 0x400806a0
    I (29) boot: ESP-IDF v4.3-dev-472-gcf056a7d0 2nd stage bootloader
    I (29) boot: compile time 17:27:20
    I (29) boot: chip revision: 1
    I (33) boot_comm: chip revision: 1, min. bootloader chip revision: 0
    I (40) qio_mode: Enabling default flash chip QIO
    I (46) boot.esp32: SPI Speed      : 80MHz
    I (50) boot.esp32: SPI Mode       : QIO
    I (55) boot.esp32: SPI Flash Size : 4MB
    I (59) boot: Enabling RNG early entropy source...
    I (65) boot: Partition Table:
    I (68) boot: ## Label            Usage          Type ST Offset   Length
    I (76) boot:  0 factory          factory app      00 00 00010000 003c0000
    I (83) boot:  1 nvs              WiFi data        01 02 003d0000 00004000
    I (91) boot: End of partition table
    I (95) boot_comm: chip revision: 1, min. application chip revision: 0
    I (102) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x1af514 (1766676) map
    I (723) esp_image: segment 1: paddr=0x001bf53c vaddr=0x3ffb0000 size=0x00adc (  2780) load
    I (724) esp_image: segment 2: paddr=0x001c0020 vaddr=0x400d0020 size=0x2ddd4 (187860) map
    I (795) esp_image: segment 3: paddr=0x001eddfc vaddr=0x3ffb0adc size=0x02154 (  8532) load
    I (798) esp_image: segment 4: paddr=0x001eff58 vaddr=0x40080000 size=0x00404 (  1028) load
    I (802) esp_image: segment 5: paddr=0x001f0364 vaddr=0x40080404 size=0x10724 ( 67364) load
    I (847) boot: Loaded app from partition at offset 0x10000
    I (847) boot: Disabling RNG early entropy source...
    I (859) psram: This chip is ESP32-D0WD
    E (859) psram: PSRAM ID read error: 0xffffffff
    E (859) spiram: SPI RAM enabled but initialization failed. Bailing out.
    I (864) cpu_start: Failed to init external RAM; continuing without it.
    I (871) cpu_start: Pro cpu up.
    I (875) cpu_start: Starting app cpu, entry point is 0x40081740
    I (867) cpu_start: App cpu up.
    I (897) cpu_start: Pro cpu start user code
    I (897) cpu_start: Application information:
    I (897) cpu_start: Project name:     recognition_command_line
    I (904) cpu_start: App version:      v0.9.3-46-g2470e47
    I (910) cpu_start: Compile time:     Jul 25 2020 17:53:11
    I (916) cpu_start: ELF file SHA256:  aabc8d81184a741d...
    I (922) cpu_start: ESP-IDF:          v4.3-dev-472-gcf056a7d0
    I (928) heap_init: Initializing. RAM available for dynamic allocation:
    I (935) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
    I (941) heap_init: At 3FFB45F0 len 0002BA10 (174 KiB): DRAM
    I (948) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
    I (954) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
    I (960) heap_init: At 40090B28 len 0000F4D8 (61 KiB): IRAM
    I (967) spi_flash: detected chip: gd
    I (971) spi_flash: flash io: qio
    I (976) cpu_start: Starting scheduler on PRO CPU.
    I (0) cpu_start: Starting scheduler on APP CPU.
    I (986) sccb: pin_sda 25 pin_scl 23
    
    I (1126) camera: Detected OV2640 camera
    I (1126) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1126) gpio: GPIO[36]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1136) gpio: GPIO[18]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1146) gpio: GPIO[39]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1156) gpio: GPIO[5]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1166) gpio: GPIO[34]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1176) gpio: GPIO[35]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1186) gpio: GPIO[17]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1196) gpio: GPIO[22]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1206) gpio: GPIO[26]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1216) gpio: GPIO[21]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
    I (1226) camera: Allocating 1 frame buffers (15 KB total)
    I (1226) camera: Allocating 15 KB frame buffer in OnBoard RAM
    I (1366) app_process: Get one frame in 34 ms.
    Item psram alloc failed. Size: 230400 x 1
    matrix3du item alloc failed.
    Guru Meditation Error: Core  1 panic'ed (LoadProhibited). Exception was unhandled.
    
    Core  1 register dump:
    PC      : 0x400d8d45  PS      : 0x00060330  A0      : 0x8008a43c  A1      : 0x3ffc08d0  
    A2      : 0x3ffb8288  A3      : 0x00000003  A4      : 0x00000000  A5      : 0x00000140  
    A6      : 0x000623d6  A7      : 0x000000f0  A8      : 0x800d8d24  A9      : 0x3ffc08b0  
    A10     : 0x3ffb83cc  A11     : 0x00000001  A12     : 0x00000000  A13     : 0x00038404  
    A14     : 0x00000000  A15     : 0x00000001  SAR     : 0x00000004  EXCCAUSE: 0x0000001c  
    EXCVADDR: 0x00000014  LBEG    : 0x400885f9  LEND    : 0x40088609  LCOUNT  : 0xfffffff8  
    
    Backtrace:0x400d8d42:0x3ffc08d0 0x4008a439:0x3ffc0950
    
    
    ELF file SHA256: aabc8d81184a741d